Stirling and Thermal-Lag Engines

Stirling and Thermal-Lag Engines

Allan J Organ

178,40 €
IVA incluido
Disponible
Editorial:
World Scientific Publishing Co Pte Ltd
Año de edición:
2022
Materia
Ingeniería mecánica
ISBN:
9781800611047
178,40 €
IVA incluido
Disponible
Añadir a favoritos

Existing literature focuses on the alleged merits of the Stirling engine. These are indeed latent but, decades on, remain to be fully realised. This is despite the fact that Stirling and other closed-cycle prime-movers offer a contribution to an ultra-low carbon economy. By contrast with solar panels, the initial manufacture of Stirling engines makes no demands on scarce or exotic raw materials. Further, calculating embodied carbon per kWh favours the Stirling engine by a wide margin.However, the reader expecting to find the Stirling engine promoted as a panacea for energy problems may be surprised to find the reverse. Stirling and Thermal-Lag Engines reflects upon the fact that there is more to be gained by approaching its subject as a problem than as a solution. The Achilles heel of the Stirling engine is a low numerical value of specific work, defined as work per cycle per swept volume per unit of charge pressure and conventionally denoted Beale number NB. Measured values remain unimproved since 1818, quantified here for the first time at 2% of the NB of the modern internal combustion engine! The low figure is traced to incomplete utilisation of the working gas. Only a small percentage of the charge gas - if any - is processed through a complete cycle, i.e., between temperature extremes.The book offers ready-made tools including a simplified algorithm for particle trajectory map construction; an author-patented mechanism delivering optimised working-gas distribution; flow and heat transfer data re-acquired in context and an illustrated re-derivation of the academically respected Method of Characteristics which now copes with shock formation and flow-area discontinuities. All formulations are presented in sufficient detail to allow the reader to ’pick up and run’ with them using the data offered in the book.The various strands are drawn together in a comprehensively engineered design of an internally focusing solar Stirling engine, presented in a form allowing a reader with access to basic machining facilities to construct one.The sun does not always shine. But neither will the oil always flow. This new title offers an entrée to technology appropriate to the 21st century.

Artículos relacionados

  • Lab Manual-MSOE02-UFPT
    Dr. Medhat Khalil / DrMedhat Khalil / Medhat khalil
    Universal Trainer Lab Manual associated with the text book HSV2 and course MSOE02 (Electro-Hydraulic Components and Systems). The manual contains lab numbers 20 to 29. It also contains instructions about the lab objectives, the devices used in the lab, the step-by-step procedure of the lab and the expected observations. ...
    Disponible

    27,55 €

  • Introduction to Engineering Design, Book 11, 4th Edition
    Jim Dally
    This book is the fourth edition of the eBook edition of the eleventh textbook in this series: Introduction to Engineering Design.  Jim Dally, working with College House Enterprises, LLC and faculty members in the Keystone Program within the Clark School of Engineering, has prepared ten previous textbooks in this series—a new one almost every 18 months.  These books are written ...
    Disponible

    79,79 €

  • Embedded Cooling of Electronic Devices
    This book is a comprehensive guide on emerging cooling technologies for processors in microelectronics. It covers various topics such as chip-embedded two-phase cooling, monolithic microfluidic cooling, numerical modeling, and advances in materials engineering for conduction-limited direct contact cooling, with a goal to remedy high heat flux issues.The book also discusses the ...
    Disponible

    182,29 €

  • Ice-templated polymer hybrids structure and properties
    S. Karthika
    'Ice-templated Polymer Hybrids: Structure and Properties' written by S. Karthika is a comprehensive book that explores the fascinating world of macroporous particle polymer hybrid assemblies, which are created through ice-templating techniques. The book delves into the complex structure and properties of these materials, providing an in-depth analysis of their physical, chemica...
  • Motorcycle Design
    James Sadauckas / Roberto Lot
    This book aims to provide the core concepts of motorcycle dynamics and illustrates their application in vehicle design to readers who have a serious interest in the subject and in particular engineers with a career path in the powered two wheelers sector. ...
    Disponible

    83,23 €

  • Fundamentals of Continuum Mechanics
    Zishun Liu
    This textbook offers a concise yet rigorous treatment of continuum mechanics at the introductory level. It differs from traditional textbooks by combining tensor analysis with mechanical analysis and teaching the former’s basics within a single chapter. Readers of this book are not required to have learned tensor analysis in the context of engineering mathematics beforehand.The...
    Disponible

    157,38 €